Set Side B

Romhack Thursday: Dragon Warrior x10

On Romhack Thursdays, we bring you interesting finds from the world of game modifications.

The early days of JRPGs contain many games that are kind of difficult to play today. The genre was just getting formulated, and while there was a lot of ingenuity and interesting ideas being played with, there were also many games where difficulty, and grind, were the entire point. When a game as simple as Dragon Quest, known first in the US by its localized title Dragon Warrior, had to justify its sale price, it had to present players with an experience that would be as long as a challenging NES platformer, or longer, within its limited memory space, and it did so with grind, asking players to accept fighting hundreds of monsters one-on-one in a basic menu-based combat simulation as fun enough to make up for most of the game.

At the time, in Japan, it worked, but it’s telling that Dragon Quest II has much deeper combat, and many more kinds of monsters, than its predecessor had. Dragon Warrior had a tough time breaking into the US market because of its simple gameplay, enough so that eventually Nintendo, who published the game in North America, resorted to giving away copies as a subscription premium for Nintendo Power.

What was a tough sell to Western players even then is much more difficult to enjoy now. Compare it to the much deeper, not to mention longer and better animated, titles made later in the series. It’s mostly enjoyable only for nostalgia factor and historical interest.

I’m not going to claim it fixes everything the game, but this hack improves its play a lot by decreasing gold prices and experience requirements ten-fold. It decreases costs: changing the earn rate of these quantities would very quickly hit Dragon Warrior’s fairly low variable caps, since the game stores both in 16-bit values. You can take the 120 gold you get from the King’s chest, buy an 18 gold Copper Sword in Brecconary, then run to the north-west to Garinham and buy the sturdy Half Plate armor for 100! With these items, even at low levels, you should be able to vanquish all of the enemies in this section of the map, except perhaps Magicians, whose Hurt spells bypass armor. But it only takes defeating one Slime to reach Level 2, two more for Level 3, and two more than that for Level 4. Slimes won’t suffice for long, but by that point you can munch on much stronger foes. This greatly reduces the number of fights a player must win to complete the game, and makes it possible to finish in less than two hours.

You can very quickly rise to decent levels of power in the starting area! You’ll still be humbled if you try to rush late-game enemies, but you don’t have to spend long building your character at all.

This guy is the Magic Refill Wizard. Don’t pay those exorbitant Inn prices, use your Heal spell repeatedly and talk to him!

Preserving some modest amount of challenge, the gold costs of Inns are left the same, making them effectively ten times more expensive. Inns were never very expensive in the unmodified game, so this makes staying the night to restore your HP and MP more of a strategic choice. A tip: remember there’s a guy in Tantegel Castle who will restore all your MP for free!

If even a two-hour Dragon Warrior is too much effort for you, you could watch this playthrough of the hack on Youtube, which is about an hour and a half in length:

romhacking.net: Dragon Warrior – 10x Experience and 10x Gold

rodneylives

Romhack Thursday: Castlevania II Retranslated & Improved

On Romhack Thursdays, we bring you interesting finds from the world of game modifications.

Castlevania II is an infamous entry in the series. While it’s the first Castlevania game to use the “Metroidvania” structure that would be more solidly associated with it after Symphony of the Night, there were a lot of… controversial elements? Townsfolk often lied to the player (in all versions of the game), and sometimes their hints were badly translated. A few places required the player to do arbitrary things without much prompting to proceed. And there were the timed scene transitions, between day and night, which some people have (rather unfairly I think) fixated upon as a major flaw.

There’s more. The Japanese version of the game came with a map of the countryside that was left out of the U.S. release, meaning, some locations in the game were not even given names that a player could discover in the game, which in a couple of places required them to guess which location was meant by a clue.

To the rescue of a player trying to appreciate this game now comes Bisqwit, a.k.a. Joel Yliluoma, and his Castlevania II Retranslation project. It doesn’t remove the townspeople telling incorrect things (which was intended by the developers-why should a random villager happen to know for certain anything to do with destroying Dracula?), but it does make their hints more comprehensible, remove the reliance on guidebooks and FAQs that have interfered with the efforts of many to enjoy the game, and it greatly speeds the transitions between day and night. It even offers an animated prologue (wait from the title screen) and an in-game map, based on the one in the Japanese manual, to lend context to the player’s explorations.

There are plenty of other new features too, such as an end-game report that gives your win time and SRAM-based (battery-backed) save games. Some of the new features require better hardware than the original game had, which may limit what devices can run it, so Bisqwit thoughtfully provides a website that allows the player to customize the modification to their liking. Go there, choose the options you want (which includes language – if the site isn’t in English click the button to the left) then click the Download button to get a version with features set to your requirements and/or liking.

Lots of romhacks seem superfluous relative to the original game, but Bisqwit’s translation patches substantively improve upon the original game in many ways. It really is the best way to experience Castlevania II. If you’ve played it before you should give it a try; if you haven’t, I strongly suggest playing this version, instead of having to suffering through the original’s quirks. At the very least you it’ll mean won’t end up having to resort hunting up a thirty-five-year-old FAQ before the end.

And if you like the patch, why not have a look at Bisqwit’s Youtube channel, which has a lot of interesting technical content on it, much of it unrelated to video games?

The hidden clubeooks get more useful advice, and you can even enable a hint viewer that records the books you’ve found during the game!

rodneylives

Romhack Thursday: Gyromite No-Robot Hack

On Romhack Thursdays, we bring you interesting finds from the world of game modifications.

People who got the expensive Deluxe Set in the early days of the NES received two so-so games instead of Super Mario Bros, both designed around the peripherals included in the set. Their compensation for not being able to bop around the Mushroom Kingdom, and paying a premium besides, was Duck Hunt, which was okay, and Gyromite, which was absurd.

As a bonus, the title screen has been changed from “Robot Gyro” too.

Gyromite, or “Robot Gyro” according to its title screen (it didn’t get localized from Japan at all!) puts you in the shoes of Professor Hector, who has to collect all the bombs in his lab. Sadly, he’s left all these monsters wandering around. Fortunately, there are these red and blue pillars that block the monsters, but they also block Hector.

The pillars can be moved, but not directly by Hector. Instead, you use the A and B buttons on the controller. But, not the first player controller: the second player controller is used. And the player isn’t supposed to manipulate them themself. They were supposed to put the controller into a contraption involving levers, spinning weights, and the “R.O.B.,” or Robotic Operating Buddy, another peripheral included in the Deluxe Set.

The intended process was:

The player uses their own controller to give commands.
The screen flashes in response to those commands.
Photoresistors in R.O.B.’s eyes read these flashes.
Depending on the flash, R.O.B. moves opens or closes its claws, lifts them up or down, or rotates.
Through these means, the player is supposed to manipulate R.O.B. to pick up the spinning, top-like gyro weights and place it in a motorized holder, which begins rapidly spinning it.
The player sends more signals, to cause R.O.B. to transfer it, still spinning, onto a platform.
The platform serves as a lever, so the weight presses down on the platform, which causes it to press the button on Player 2’s controller.

The signals control R.O.B.’s motions, not the controller’s. They result in it lifting or lowering his claws, or opening or closing them, or rotating. What if a weight runs out of spin and falls over? Well, it’s up to the player then to manually pick the weight up and put it back into its holder, during the game, as R.O.B. has not the facility to do that itself.

Above, Youtube user zoclates demonstrates this process in an advanced level of Gyromite. Here is a direct link, it’s about six minutes long. Surely, kids who got the Deluxe Set enjoyed this far more than they would playing Super Mario Bros.

These days R.O.B. has retired to serve as one of the weirder characters in the Smash Bros. series. But there’s actually a kind of fun game there in Gyromite, beneath the involute process intended to control it. You can play it without R.O.B. at all, just by directly pressing the buttons on the second controller yourself, but this is both a bit unwieldy, and makes the game too easy.

The Gyromite No-Robot patch localizes these functions on one controller. Since the unmodified game’s timer for each level is extremely long to allow for the time it takes for R.O.B.’s mechanics to function and for the tops to spin up, it also shortens the time limit to preserve some element of challenge. It turns a game that requires expensive and rare hardware to play it as intended, or at least remapping the Player 2 controller in an emulator, and making it much more enjoyable.

Gyromite Special Edition [romhacking.net]

rodneylives

Romhack Thursday: Vs. Super Mario Bros on NES

On Romhack Thursdays, we bring you interesting finds from the world of game modifications.

Nintendo is a company with a long history, having gotten started making playing cards. They jumped into the video gaming market, like a lot of companies, making dedicated consoles that were released only in Japan. It was the release of the arcade game Donkey Kong that started them on the path to becoming the worldwide success they are today.

Title screen for the Vs. Super Mario Bros hack

The sales of Donkey Kong, and successor games like Donkey Kong Kr., Donkey Kong 3, and Mario Bros., put a lot of Nintendo cabinets out there. In the mid 80s there arose a market for upgrade kits, an alternate set of internal components for an arcade machine that could make it into a new game for players to enjoy. Simultaneous with the success of the Famicom and NES, Nintendo sold a kit called the “Vs. System” that their old cabinets could be converted into, as well as dedicated cabinets that used it.

Among the software Nintendo made for their Vs. cabinets, so they made special arcade versions of many of their NES cartridges for it. Many of these are expanded versions of the originals, with new features. We’ve already looked at Vs. Castlevania, a version of Castlevania remixed for the Vs. Unisystem by Konami. One of these updated versions was of Nintendo’s first huge Famicom hit, called Vs. Super Mario Bros.

Hey, that flower’s supposed to be a 1 Up Mushroom!

Vs. Super Mario Bros. seems, at first, a lot like the original game. It’s got a high score screen and some other minor changes. Players familiar with the Famicom/NES version will find that it changes significantly as they get further into it. Many later levels are completely changed, and much harder. When Nintendo released the Japan sequel to Super Mario Bros., they used levels from the Vs. System port to help flesh it out.

Many changes were made to the game to support arcade play. “Loops” where players could farm extra lives were toned down or removed, extra lives in general were reduced in number, and warp zones don’t take the player nearly as far into the game. Another change made was to add operator adjustable difficulty, allowing the cabinet owner to set how many coins were needed for an extra life.

Through emulation, Vs. Super Mario Bros is completely supported in MAME. But for technical reasons, you can’t just play MAME roms in an NES emulator. If you’d like to play it in the emulator of your choice, or have a means to get it running on actual hardware, creator BMF54123 applied all of the play changes of the arcade version back into the NES version of Super Mario Bros., and even added a title screen that allows you to apply the same difficulty settings that were available to an arcade operator.

Expect a number of tricks that would later get reused in the Japanese sequel to Super Mario Bros.

If you’ve never played Super Mario Bros before… then wow, I’m impressed you even found this blog. But also, this is perhaps not the best way to experience the game now. The demands of arcade design make for a much more challenging experience than the original. If you’re very familiar with the home versions, though, it can be an interesting new way to experience it.

Vs. Super Mario Bros for NES (romhacking.net)

rodneylives

Romhack Thursday: Junkoid

On Romhack Thursdays, we bring you interesting finds from the world of game modifications.

A hack of NES Metroid, Junkoid doesn’t offer many changes to the original game besides graphics and area maps. Most of the engine changes it has are pre-existing patches made by other people. It uses the Metroid map and save game patch, but only offers a map for the starting region. Fortunately, while it has some cool secret areas to find, its mazes aren’t particularly complex, and I was able to complete it without keeping any maps on paper.

Junkoid’s premise is that the game world is a dream had by its protagonist, which is its excuse to provide a variety of imagery without any great coherency to it. One area seems like it’s drenched in blood, which I am not usually a fan of) Another like it’s a cloning factory, dedicated to making clones of the heroine, but its boss is a penguin that acts mostly like Ridley.

For the most part it’s not too difficult going, but I found that the final boss could be very frustrating. It uses Mother Brain’s coding most as-is, and doesn’t have the Zebetite gates immediately before it so you can get by with fewer missiles, but it’s very easy to get tossed around by the various hazards of the final area, and the boss’s weak spot, which can only be harmed by missiles, was a bit too finicky when registering hits. Still though, I can vouch that it’s possible.

Have some more screenshots:

Junkoid’s Romhacking.net page

rodneylives

Romhack Thursday: Advanced NES Rom Utility

Edit the Frog would like you to know that he has no relationship with that meme frog going around.

On Romhack Thursdays, we bring you interesting items from the world of game modifications.

We’re starting another weekly feature on Set Side B, where we try to regularly bring you news on new romhacks and romhack-related items. Big websites sometimes seem like they try to appease publishers, whose good graces they rely upon for news and review copies, by not mentioning hacks too prominently, at least if they’re of console games. Whether this happens, or if it merely seems like it may happen, we don’t ask big publishers for review copies so we don’t have to avoid talking about them, and are free to tell you about the most interesting of these game edits that we can find.

To start us out though, something you’ll find you’ll need if you make heavy use of hacks, are good rom patchers. To shield themselves from legal liability, hack authors usually distribute their modifications through the use of patches, which are in essence lists of modifications that can be applied in an automated way to a source rom file, which you’ll have to source by some other means.

Two good such utilities are Floating IPS, which can apply IPS patches, and (the sadly departed) Near’s beat, which can apply BPS patch files. IPS is the most commonly-used utility, and functions mostly as a kind of binary diff, but it’s limited to source files of a maximum size of 16 megabytes, and doesn’t offer any error detection features, so if the file you’re patching isn’t exactly what the patch expects (which happens frequently, as bad dumps or headerless roms often turn up), not only will you end up with a corrupted file, but you won’t even have any indication something has gone wrong-in most cases, you’ll still be told the file patched successfully. BPS is a more intelligently-designed system, and has some error detection built-in.

A new utility that can be of use is “Advanced NES Rom Utility,” a program that can not only apply both IPS and BPS patches but several other types as well, and can also fix many common problems with NES dumps in particular, including fixing checksums and metadata. But patches are usually source platform agnostic, so you might get some use out of it even if NES romhacks are not interesting to you.

rodneylives